Spectralis Image Export w/o Scan line? https://www.opsweb.org/forums/posts.aspx?topic=581062 Tue, 21 Jul 2026 09:28:20 GMT Tue, 11 Jun 2013 14:47:39 GMT Copyright © 2013 Ophthalmic Photographers' Society Spectralis Image Export w/o Scan line? https://www.opsweb.org/forums/posts.aspx?topic=581062 https://www.opsweb.org/forums/posts.aspx?topic=581062 Anyone out there have the secret recipe to export a Spectralis images w/o the orientation scan showing up in the fundus image?

I tried toggling it off in the viewing window, then exporting the image, but it still shows up.

I also checked the export dialog and didn't see a check box for this, and export "info" is unchecked.

Other thoughts?

Thanks!

j-

]]> Tue, 21 May 2013 20:27:18 GMT Spectralis know how.. https://www.opsweb.org/forums/posts.aspx?topic=581106 https://www.opsweb.org/forums/posts.aspx?topic=581106 I defer all Spectralis knowledge to Master Mark Croswell,

and, to the lovely Ms. Leah Gibbons.

Good Luck.

Soque

]]> Tue, 21 May 2013 21:12:53 GMT https://www.opsweb.org/forums/posts.aspx?topic=593193 https://www.opsweb.org/forums/posts.aspx?topic=593193 in the upper right corner there 's a box tha say ILM-RPE that will take all analysis lines away and also 3 boxes in theres 2 squares ad when you hover over it should say "control tomogram layer displays" that takes off any algorithm lines! Hope that helps?!

 

]]> Tue, 11 Jun 2013 14:05:54 GMT https://www.opsweb.org/forums/posts.aspx?topic=593235 https://www.opsweb.org/forums/posts.aspx?topic=593235 Jim,

Once you have selected the scan you want to export, click on "HRA Image" at the top then deselect "Show Scan Position" (or use F6). This worked for me.

 Don

]]> Tue, 11 Jun 2013 15:26:34 GMT https://www.opsweb.org/forums/posts.aspx?topic=593242 https://www.opsweb.org/forums/posts.aspx?topic=593242 Thanks Don

You confirmed that i'm "doing it right".  For whatever reason, even if i toggle it off (F6) in the review window, the marker still ends up in the exported image.  The toggle (F7) works for the OCT image however.

Maybe it's just a quirk with our system.

j-

]]> Tue, 11 Jun 2013 15:47:39 GMT